£119.69 - £108.38
(as of Oct 21,2021 14:51:14 UTC – Details)
Why is AUTOPHIX 7610 VAG scanner so popular among customers? What are the special functions about it?
1.Full OBDII functions: Read Fault Codes,Erase Fault Codes,Read Datastream,Vehicle Information,EVAP test
2.AP7610 Basic functions: Read Fault Codes,Erase Fault Codes,Read Datastream,Version Information
3.Oil Lamp Reset : Reset the oil life systems every time the oil and oil filter are changed;
4.Injector : Code new injector-numbers to take place of the previous one when fitting the new injectors or after the replacement is completed;
5.Electronic Parking Brake Reset : Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
6.Steering Angle Calibration: Perform steering angle sensor calibration and clear records;
7.Battery Register / Battery Maintenance： Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
8.ABS Bleeding : When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
9.Electronic Throttle Position Reset / Learn : Initialize the throttle actuators so that the “learned” values stored on ECU are back to the default state;
10.TPMS Reset : Tire pressure resetting is required to be performed after maintenance is performed;
11.Diesel Particulate Filter (DPF) Adaption and Regeneration： Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
12.ACSM/airbag ECU reset，RDC TPMS ECU reset ,Reset Fuel pump，Transmission System Functions/ESP System Functions /Immobilizer System Functions…..etc.
To confirm if AUTOPHIX 7610 scanner tool is compatible with your vehicle, you can download the Application Guide in Technical Specification part on details page to check it. Or Check on our website,Or send us with the brand name, model, VIN and produced year of your vehicle via the Message. Below are some troubleshooting for your reference:
Q:How to get it start?
A:Simply plug into the OBD II port on your car and turn ignition on and you ready to go. It does not need any battery or charger, gets the power directly from the OBDII data link connector in your vehicle.
Q: Why i can not update it on my MacBook?
A: This scanner tool only support to update on WINDOWS SYSTEMS, can not be update on MAC SYSTEMS.
Q: What if the scan tool cannot communicate with a our car?
A: Please check the following possible reasons:
First, please check if the software has been updated to the latest version.
Second, please check if there is any data link connector besides the 16 Pin one. Some models like G-Class: 461, 463/SLK: 170 may need a 38-pin to 16-pin connector cable.
Q: How can I change the brightness of the screen?
A: AUTOPHIX 7610 scanner for VW vehicle group have Two skin style for choosing, you can choose white skin to enhance visibility during the day, and you can choose black skin to protect your eyes during the night. These functions can be implemented on the settings menu.
Q: How to change the LANGUAGE?
A: AUTOPHIX scanner tool supports multi-lingual menu operation, such as English, French, German, Russian, Spanish and etc almost 10.
ABS (Brake Auto Bleed) / SRS (Adjustment steering-angle sensor)
The SRS crash data diagnose and reset. Read the SRS(Airbag) system error code accurately and erase the error code, turns off the airbag warning light. To prevent the dreadful danger caused by the airbag not working properly after a collision.
The ABS diagnostic function is used to retrieve and clear error code, display and save data streams or module information.What is more, the Auto Bleed function will help get air that is trapped in the ABS actuator module out when bleeding your brake lines to ensure that repairs to this vital system are effective and complete.
SAS (Steering Angle Sensor) / EPB (Electronic Parking brake)
The SAS Calibration Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in thesteering angle sensor .
The EPB function has a multitude of uses to maintain the electronic braking systems safely and effectively. The applications include deactivating/activating the brake control system, assistingwith brake fluid control, brake diagnostics, openingand closingbrake pads, settingbrakes after disc or pad replacement and also readingand clearingEPB/SBC trouble codes. It is also capable of retrieving Fault Codes information from the ECU.
Oil Light/Service Reset
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display and according to the recommended maintenance schedule. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a service indicatorbeing turned on, also reset the system.
BMS / DPF Service
The DPF function allows you to carry out numerous functionson the Diesel Particulate Filter system. The tool will retrieve/erase DPF-related codes, reset the DPF light after thefilter has been replaced, micromanage the injection rate, and burn off collected particles when a maximumfill level is reached.
The BMS function allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery eplacement, activate the rest state of the vehicle, and charge the battery via the diagnostic socket.
AUTOPHIX is focus on OBDII tool, which has set itself as a professional supplier in the automotive after market the holds itself to the highest standards of quality.
Works on most BMW vehicles sold in the US with the model year of 1996 – 2020.
Meanwhile, we have upgraded our products for the American market.
Meanwhile, we have upgraded our products for the American market.
Perfect Performs Vehicle Battery Analysis
Detect real-time data from 12V batteries and display BATTERY DATA with fluctuations ranging from 8V to 18V. The discharge voltage of a normal battery is about 12V, the starting voltage is generally 12V, and the charging voltage is about 14V. Our technical team recommends that you monitor your battery and register it if the battery is not in good condition.
Ⅰ：<10.8V Before Starting- Too Low, change battery, or may be unable to start.
Ⅱ：10.8V-11.8V Before Starting- Slightly Low, difficult to start, please turn off other electronics and start to charge.
Ⅲ：11.8V-12.8V Before Starting- Normal.
Ⅳ：12.8V-13.2V After Starting- Too Low, might be unable to charge the battery, please check other electrical load.
Ⅴ：13.2V-14.8V After Starting- Normal.
Ⅵ：>14.8V After Starting- Too High, may damage battery, please check engine stabilizer.
Ⅶ：*Readings may have ± 0.1 V deviation
How to register a battery with this car diagnostic tool for VAG vehicle? In fact, it’s much easier than imagination. Here is the process step by step: Remove old battery -Install new battery -Enter a new battery digits code(Please correctly enter the digit battery code , Or it will affect the accuracy of the product .) .If you still have questions about battery replacement or other detail problems, just write to us, we’ll try our best to help you out.
Full OBD2 MODES
AUTOPHIX 7610 is a handheld scanner that features 6 OBD2 test modes as read/clear code, view real-time data/vehicle information, retrieve I/M readiness status and EVAP system test, etc. The affordable OBD2 scanner cannot only retrieve generic (P0, P2, P3, and U0) but also the manufacturer-specific (P1, P3, and U1) codes, aiming at helping technicians quickly identify the faulty part and accurately diagnose the emissions-related problems.
FIX CAR BY YOUSELF–SAVE TIME AND MONEY
Perform a complete diagnosis of your car anytime, anywhere with AUTOPHIX 7610 check engine light diagnostic tool by youself. It is designed for fast use so you can get the results you want in the shortest time with one-click hot keys(I/M or READER DTC) for reading/clearing error readers. It enables you repair the problem yourself, or let you know exactly what needs replacement in case you need to take your car to a repair shop. This helps you avoid blind maintenance and repair costs that could amount to hundreds or thousands of dollars.
➤For VW/Audi/Skoda/Seat vehicles, read and erase codes on Engine, ABS, Transmission, SAS (not all cars), ESP, TPMS and more systems;Reset the oil, brake pad and Throttle position adaption. For normal OBD2 vehicles,read and erase codes; show definitions, turn off the MIL (check engine light) and retrieves VIN information.
➤Powerful Special Functions Service Reset, Throttle Learning, EPB Replace brake pads, Diesel engine special fun, steering angle learning, Tire pressure reset(TPMS), Injector adaptation.
➤AP7610 car diagnostic tool via 2. 8″ TFT 262K true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each of menu options, Rugged drop-proof case Prevent falling, the menu layout on the screen is easy to understand and you will no trouble to figuring out how to do what you needed.
➤With 7610 automotive scanner, you can enjoy life-time Free software upgrade, which let you stay current with the latest technology and add newest vehicles. Just download the software from AUTOPHIX website, then follow on-screen instructions to go. this 7610 Professional Scanner suitable for personal and auto repair shop.